Configuring Konica Minolta devices

This manual is applicable for Konica Minolta - Zeus/Minerva series

This manual is applicable also for Develop, Olivetti and Aurora devices.

Requirements

  • Correct firmware is installed on MFD (for more details see  HCL on ysoft.com)

  • MFD is OpenAPI 3.5 or higher if embedded accounting / application shortcuts / web browser terminal functionality is required. Models that support OpenAPI 3.5 or higher may need HDD and/or additional memory installed (for more details see  HCL on ysoft.com)

At Glance

  1. Configure and enable SSL

  2. Disable the Certificate Verification Settings option

  3. Enable OpenAPI on a device

  4. Configure SSL for OpenAPI and TCP Socket communication

  5. Configure region (Develop only)

  6. Disable all other authentications ( User Account Track , ID & Print , key counter, Vender2 cable etc.)

  7. Add domain DNS suffix in Network settings - Default DNS domain name (in case a host name for SPOC is used)

  8. Configure the Windows print driver

  9. Install loadable drive r (if Card authentication is required)

  10. Configure USB card reader settings  (if authentication by CARD is required)