Skip to main content
Skip table of contents

Configuring Konica Minolta - older models

Requirements

  • Correct FW installed (for more details see HCL – Konica Minolta)

  • MFD must be OpenAPI 3.5 or higher if embedded accounting / application shortcuts / web browser terminal functionality is required. 
  • Models that support OpenAPI 3.5 or higher usually need HDD and/or additional memory installed (for more details see HCL – Konica Minolta )

  • If SafeQ on-line print accounting is required
    • No ZERO counters. Normal (A5/A4/letter) page copy, normal page print, large (A3/legal/tabloid) page copy, large page print counter must not be 0
    • MFD Service Menu > Counter setting > total counter mode – MODE 2 is set!

At Glance

  1. Install loadable driver (if authentication by CARD is required)
  2. KM - Configuring and Enabling SSL
  3. KM - Disable the Certificate Verification Settings option
  4. KM - Enable OpenAPI on a device (especially when external terminal was used before embedded installation)
  5. KM - Configure SSL for OpenAPI and TCP Socket communication
    1. KM - Using the MFP Web interface to configure SSL settings
    2. KM - Using the MFP Panel to configure SSL settings
  6. KM - Configure switches
  7. KM - Configuring USB Card Reader Settings (if authentication by CARD is required)
  8. KM - Configure Print without authentication option (if printing of documents, that are sent directly to the MFP's IP address is required)
  9. KM - Disable the ID and print option on the MFD
  10. KM - Configure User Authentication and Account Track
  11. KM - Install loadable driver
  12. KM - Disable all other authentications (User Account Track, key counter, Vender2 cable etc.)
  13. KM - Add domain DNS suffix in Network settings - Default DNS domain name (in case a host name for SPOC is used)

Configure print driver as follows:

  1. Printer properties - Configure - Device Options are configured to support all possible features (Punch unit, Finisher etc.)  
  2. Printer properties - Configure - Obtain Settings - Auto = not checked
  3. Printer properties - Configure - User Authentication = disabled
  4. Printer properties - Configure - Account Track = disabled
  5. Printer properties - Ports - Enable printer pooling is checked + additional ports are created and checked to be used (remove windows print spooling bottleneck) 
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.